As part of the preparation for the Pendrakon Battleground Middlesbrough Wargames Show, I had to practice my late-war German three tone camouflage painting scheme. The idea was to use Pendrakon 10mm miniatures for the Wargames Development (WD) "A Bridge Too Far" participation game. For my 20mm models I had previously used Tamiya colours (Sand, Matt Earth and Deep Green/Olive Drab, highlighted up with Yellow and White) but for smaller scales the Vallejo paints are a much better to paint with. The Flames of War (FoW) painting guide gives a very good Vallejo recipe (see below, this is "Issue Two" which was the "German" edition - with lots of Panzer (and other things German) painting guides):
The Late War German Three Colour Camouflage Vallejo Recipe:
Shade:
Y: Green Brown (879)
B: Flat Brown (894)
G: Luftwaffe Camo Green (823)
Base:
Y: Middlestone (882)
B: Chocolate Brown (872)
G: Reflective Green (890)
Highlight:
Y: Buff (876)
B: Beige Brown (875)
G: Russian Uniform Green (924)
Tracks:
German Primer undercoat Cavalry Brown (987)
Brown Wash
Gunmetal (863) Dry Brush
Black Wash
Final Gunmetal (863) Highlight
Washes:
Watered down Black and Brown Vallejo "Dipping Washes" (the big vat ones)
For my first subject matter "test case" I chose a couple of 1/200 Skytrex Action 200 WWII German AFV miniatures I had (see below, two Stug IIIGs, nasty when coupled with close support Panzer Grenadiers. I was pleased with the result but wanted some more experimentation before I jumped up to 10mm):
For my second subject matter "test case" again I chose some 1/200 Skytrex Action 200 WWII German AFV miniatures (they had been around for ages, purchased from a hobby lot on eBay and I have been meaning to repaint them for absolutely ages - no better time than now). In fact these were used in the WD "A Bridge Too Far" participation game I hosted with John Armatys at Partizan, Newark (Second Partizan in the vernacular I think) earlier this year (see below, a Panther [with added foliage] and a Pz IVH, looking for Shermans, or anything with a White Star on it for that matter. They are are old [1980s?] but I think they still hold their own!):
I always thought the Skytrex 1/200 Action 200 AFVs were nice kits, but I was less taken with their infantry, although perhaps to scale they are a bit spindly. I do have the infantry but I prefer to use their early war 1/200 AFV models freely with Pendrakon's "slightly larger" 10mm infantry figures. I think it works really well for Spearhead and Command Decision level games, wheer a base is a platoon of infantry or a troop of tanks. I use this combination for my France 1940, Russian 1941-42 [while German things were painted grey] collections, however for my new Western Desert project [British, Commonwealth, Italian and DAK] I am going full in for 10mm (Pendrakon and Miniature Figurines being my current figure sources). I have not quite decided for late war, originally it was going to be big-boy 10mm kits in 1943-45 in Europe and the East. Quite unexpectedly though, I acquired two battalions (one Sherman and one Cromwell) worth 1/200 1944 British Armour and a 1944 Panzer Division's worth of German Armour (Panthers, Pz IVHs, Stug IIIs, Half Track 251s, Tigers, King Tigers and various assault guns). eBay, a blessing and a curse! The same old dilemma [same period and multi-scale hell], but in my heart I know I will do what I usually do and - collect both, so late war Eastern Front beckons in 10mm methinks [unless a large 1/200 set of Russians appear]. Which means I will have to double up on German 10mm late war kits - which I think I can live with (see below, I do like the way the camouflage blends into the terrain board):
Practice run complete and I jumped up in scale to the 10mm Pendrakon AFVs (see below, a 10mm Stug IIIG - it is very nice, it naturally takes more time to paint but it is very satisfying and the metal pieces went really well together - nice casting Pendrakon!):
When the camouflage painting is done there comes the tactical markings and/or national insignia, so do you decal or go free hand paint? I decided to give the free hand a go [it was only a single tank], with the aid of a new secret weapon! A Posca Art Paint Pen I had picked up ages ago, in a back to school sale (see below, sadly I discovered the pen nibs were a tad too large for meaningful detail work [OK for 20mm-25mm-28mm-54mm] but all I could get was a blob that was useful for the outer white cross area, so I could then fill in black and touch up round the edges (see below, the finished product, which in the end I am quite proud of):
Altogether a satisfying project. I intend to finish the rest of the 1/200 German battalions (Spearhead and Command Decision Order of Battle) in this scheme.
For my second subject matter "test case" again I chose some 1/200 Skytrex Action 200 WWII German AFV miniatures (they had been around for ages, purchased from a hobby lot on eBay and I have been meaning to repaint them for absolutely ages - no better time than now). In fact these were used in the WD "A Bridge Too Far" participation game I hosted with John Armatys at Partizan, Newark (Second Partizan in the vernacular I think) earlier this year (see below, a Panther [with added foliage] and a Pz IVH, looking for Shermans, or anything with a White Star on it for that matter. They are are old [1980s?] but I think they still hold their own!):
I always thought the Skytrex 1/200 Action 200 AFVs were nice kits, but I was less taken with their infantry, although perhaps to scale they are a bit spindly. I do have the infantry but I prefer to use their early war 1/200 AFV models freely with Pendrakon's "slightly larger" 10mm infantry figures. I think it works really well for Spearhead and Command Decision level games, wheer a base is a platoon of infantry or a troop of tanks. I use this combination for my France 1940, Russian 1941-42 [while German things were painted grey] collections, however for my new Western Desert project [British, Commonwealth, Italian and DAK] I am going full in for 10mm (Pendrakon and Miniature Figurines being my current figure sources). I have not quite decided for late war, originally it was going to be big-boy 10mm kits in 1943-45 in Europe and the East. Quite unexpectedly though, I acquired two battalions (one Sherman and one Cromwell) worth 1/200 1944 British Armour and a 1944 Panzer Division's worth of German Armour (Panthers, Pz IVHs, Stug IIIs, Half Track 251s, Tigers, King Tigers and various assault guns). eBay, a blessing and a curse! The same old dilemma [same period and multi-scale hell], but in my heart I know I will do what I usually do and - collect both, so late war Eastern Front beckons in 10mm methinks [unless a large 1/200 set of Russians appear]. Which means I will have to double up on German 10mm late war kits - which I think I can live with (see below, I do like the way the camouflage blends into the terrain board):
Practice run complete and I jumped up in scale to the 10mm Pendrakon AFVs (see below, a 10mm Stug IIIG - it is very nice, it naturally takes more time to paint but it is very satisfying and the metal pieces went really well together - nice casting Pendrakon!):
When the camouflage painting is done there comes the tactical markings and/or national insignia, so do you decal or go free hand paint? I decided to give the free hand a go [it was only a single tank], with the aid of a new secret weapon! A Posca Art Paint Pen I had picked up ages ago, in a back to school sale (see below, sadly I discovered the pen nibs were a tad too large for meaningful detail work [OK for 20mm-25mm-28mm-54mm] but all I could get was a blob that was useful for the outer white cross area, so I could then fill in black and touch up round the edges (see below, the finished product, which in the end I am quite proud of):
Altogether a satisfying project. I intend to finish the rest of the 1/200 German battalions (Spearhead and Command Decision Order of Battle) in this scheme.
Those are very nice indeed Mark, but also leave me very puzzled. I've come across the suggestion that 'Middlestone' is a good match for dunkelgelb a few times, but in my experience it comes out far too green. In fact I use it as the green disruptive pattern for north African German armour and the mid green on French tanks! Yet yours looks very.... sandy. Perhaps I've got a bad pot? I've started using VJ Dark Sand for dunkelgelb since my Humbrol acrylic all ran out.
ReplyDeleteGood point .. I had a pot of Middlestone for a while "wondering" when I would be using it .. until I followed the Vallejo recipe book .. note it goes on top of Green Brown .. not sure if there is any paint magic happening, also you are also seeing it with dabs of Buff highlight - the final thought is these are smaller models 1/200 and 10mm and the smaller you go the lighter the colours become? Still thinking about what you said .. for the 20mm kit Tamiya looks good and their Sand is not Middlestone. The FoW painting guide is for 15mm in general, which I know is your preferred WWII scale.
ReplyDelete